SharkBite quick connect tee pipe fittings are push in connection, connecting copper pipe, PEX pipe, CPVC pipe and PE-RT pipe. It can rotate after installation, and can be easily installed in a narrow space. SharkBite pipe fittings are certified for drinking water and liquid cooling and heating cycles.
approval
ASSE 1061
CSA B125.3
NSF 372
NSF/ANSI 61
1″ X 1″ X 1″
U374LF
home decoration Stainless steel water pipe The function of "" is to connect the pipes, so that the pipes can change direction and specification. Therefore, in general, the pipes and pipe fittings are all supporting facilities, and the wall thickness regulations are also consistent. So what harm is the different thickness for the application of stainless steel plate pipe fittings?
According to the analysis of the characteristics of the NACA compression type pipe fittings, it is based on the rigidity of the stainless steel plate itself, and the connection is carried out by pressing the receiver. Therefore, the wall thickness of the stainless steel pipe fittings and the pipe fittings for home decoration plays a key role. If the wall thickness of the pipe fittings and the pipe fittings are not consistent, the rigidity is also different, and the crimping support will be unbalanced, which will reduce the quality and functionality of the goods.
Since the compression type connection relies on the wall thickness to produce deformation and seal with the standard parts, the compression strength provisions for the deformation of the upper surface layer cannot be taken into account for the too thin wall thickness, and the compression strength provisions for the compression connection cannot be taken into account for the too thin wall thickness, which will leave hidden dangers and easily cause water seepage or leakage accidents.
therefore Pipe manufacturer The specification and model of pipes and pipe fittings shall be provided with supporting facilities; The wall thickness of pipe fittings and pipes should be consistent, which has a key effect on the credibility of crimping and electric welding; Check whether the wall thickness of the elbow outside is within the scope of the specification; Inspect the wall thickness of "three-way opening" and "U-groove".