2"x1-1/2"x1-1/2"
(50.8mmX38.1mmX38.1mm)
2"x1-1/2"x2"
(50.8mmX38.1mmX50.8mm)
2"x2"x1-1/2"
(50.8mmX50.8mmX38.1mm)
3"x3"x2"
(76.2mmX76.2mmX50.8mm)
4"x4"x2"
(101.6mmX101.6mmX50.8mm)
4"x4"x3"
(101.6mmX101.6mmX76.2mm)
Applied Charlotte water pipe Sometimes there is water leakage. How can we solve this problem? Next, I will explain to you, Domestic water pipe In fact, we are not unfamiliar, but in the case of selection, we need to rely on various aspects of the investigation to select a suitable water pipe.
1. If the water leaks after the water pipe is installed, everyone should check whether it is brittle and whether the screw is loose. First, turn off the water mixing valve, remove the hot and cold water pipes, and search for the problem, if it is the water mixing valve or hot and cold water pipes Stainless steel water pipe If they are damaged or rusted, they have to be replaced.
2. If the sink leaks, the sink may be damaged by the stainless steel sink plate, or the connection between the sink of the stainless steel sink and the domestic water pipe. If the sink is damaged, the system leak below 3mm can be immediately wiped with waterproof putty; If there is a system leak below mm, it is proposed to use galvanized iron to make straight hair splint, and the middle is wiped with waterproof putty. If the eyelet is too big, it is strongly required to replace it!
3. If it is Drainage pipeline The water leakage of the system may be caused by the leakage of the sewer or the domestic water pipe. If it is caused by the leakage of the sewer, remove it and carefully check whether the rubber plate is not padded or becomes brittle and ineffective. If the domestic water pipe becomes brittle, there is no need for maintenance. Generally, it cannot be blocked. It is OK to replace it with a new set of water pipes.
Before installation, the drainage pipes shall be inspected strictly. The inner and outer walls of the drainage pipes shall be smooth and flat, without bubbles, cracks, cracks, dents, molts, severe cold spots and obvious marks.